Once the weather finally begins to warm up and the climate begins to look lovely again, spring is a season eagerly anticipated after the long, cold winter. Most swimmers view this time of year as a welcome opportunity to enjoy the outdoors while partaking in their favorite sport. Most pool owners plan pool parties to enjoy with their friends and families. Does that mean no more work will be done on the pool before the season begins? In any case, the reply is negative. During the colder months, many pool owners close their facilities. This makes it their responsibility to ensure that it is healthy, clean, safe, and suitable for swimming. Are you a pool owner searching for tips for preparing your pool for spring? If you answered yes, you’d be happy to know that this post has simple guidelines for getting your pool in good shape.

Preparing Your Pool for Spring

Preparing your pool for spring: A Step-by-Step Guide

There are a number of steps that you should follow in preparing your pool for spring.

·        Cleaning your pool cover

During the colder months, many homeowners cover their pools with a solid winter or safety cover. You can use a cover pump to get rid of water on the cover. After that, use a blower to get rid of the leaves and dust that have settled on the cover. If left unattended, the debris could end up in the pool, contaminating the water.

·        Remove, clean, and store the cover

You might want to hire an expert if this is your first time doing something like this. Carefully take off the cover and use a brush to clean it. Use a spray and then dry the cover. To prevent mold from growing on the cover, sprinkle it with powder on both sides and let it dry. Once it dries, put it away somewhere cool and dry until the following season.

·        Bring the water level back up to normal

A simple garden hose may return the pool’s water to its usual level.

·        Check the pool equipment and reconnect it

Assuming you’ve completed the tasks above, your attention can shift to the pool’s equipment. Inspect if the equipment is in working order and reconnect all its parts. Your pool pump, ionizer, filtration system, heater, and so on are all examples of pool equipment. If you have an above-ground pool, you’ll need to reconnect the plumbing lines leading to a skimmer and the pool equipment.

·        Remove plugs from the equipment:

Take out the plugs from the skimmer and the return pipes. Carefully wait until all of the antifreeze has drained before removing the plugs. Ensure the drain plugs are back in place on the heater, pumps, filter, and other equipment.

·        Turn on your pool equipment

Turn the switch on after you’ve double-checked everything. The pump is a good place, to begin with. The pump must be primed before you switch on the circulation and filtration systems.

·        Checking your pool’s water chemistry

This is a simple task to undertake with a test kit and test strips. The ideal ranges to aim for are calcium hardness of 200–400 ppm, 80–120 ppm for total alkalinity, a pH of 7.4–7.6, and 2-4 ppm for free available chlorine. The pH of a non-chlorinated pool needs to be between 7.0 and 7.4, with less emphasis on alkalinity, and cyanuric acid or no chlorine levels should be present.

·        Adjusting the pool water chemistry

Then, bring the water’s chemistry up to par. To open a pool, a chlorine shock is usually unnecessary. Never shock an ionized pool.

·        Spots of discoloration on the surface

Manganese and iron, which occur naturally, can stain a pool’s interior. Stains can be due to debris like branches, nuts, and leaves sitting at the pool’s bottom for too long. It’s important to identify if the stain is inorganic or organic so that you can treat it appropriately. Using a stain test kit before purchasing and applying products that may not solve the problem is advisable. If you need help, contact pool professionals at Purpose Pools.

·        Clean the pool and surrounding area using a vacuum

After balancing the water, it’s a good idea to give the pool and its environs a good vacuuming.

Preparing Your Pool for Spring

·        Initiate the sanitation and filtration system for the pool

In other words, after cleaning the pool, this is the final procedure. In order to get rid of the floatables, you can use a recirculation system. It is time to turn on the ionizer and raise the copper levels in an ionized pool. While filtration is useful for removing larger particles, a pool ionizer is essential for maintaining a healthy environment and halting algae growth.

Preparing your pool for spring: conclusion

The best method to guarantee that your backyard is swim-ready is to get ready for the reopening of your pool. A little bit of know-how, some new toys, and a lot of hard work can turn a worn pool into a beautiful haven in time for the warmer months. Purpose Pools is here to help if you find yourself pressed for time but eager to get your pool ready for spring. Preparing your pool for the spring season with the help of our pool maintenance, repair, and cleaning service is necessary! If you have any inquiries, please feel free to contact us here. One of our professionals would be glad to help you.


Have More Questions or Need Pool Service or Repairs?